On average, flat surfaces of Wallrock Thermal Liner use 3.5kg of Thermal liner Adhesive , damaged and textured surfaces use 5kg. *Typical coverage may vary depending on application*.

Yes, but before applying Wallrock Thermal Liner,  you must lightly sand the ceiling and size with a PVA or Flake Adhesive. This will form a good surface for the Thermal Liner Adhesive to adhere to.

Yes you can use Wallrock Thermal Liner in bathrooms, and you must use ‘Thermal Liner Adhesive’ as it is specially formulated to hang Thermal Liner. However,  we  ‘Do Not’ recommend you use within shower areas.

Yes, we recommend the use of Wallrock Thermal Liner Adhesive only as it has being tested to hang Graphite Insulating Lining Paper. There are many other adhesives which may work but have not being tested.

On average, for Graphite Insulating Lining Paper,  flat surfaces require approximately 3kg of Thermal Liner Adhesive, damaged and textured surfaces require approximately 5kg. *Typical coverage may vary depending on application*. We recommend the use of Wallrock Thermal Liner Adhesive only.

Yes,  we recommend the use of Wallrock Thermal Liner Adhesive only, as it has been tested to hang Insulating Lining Paper. There are many other adhesives which may work but have not being tested.

On average, flat surfaces use approximately 3.5kg of Thermal Liner Adhesive, where as damaged and textured surfaces use approximately 5kg. *Typical coverage may vary depending on application*.